zxdsl 531 B
с Ай пи делал все как написано в инструкции
ща скопирую ерунду что тут есть
Wireless Basic Settings
This page allows you to configure basic features of your wireless network. You can enable or disable the wireless interface, hide the network from active scans, set the wireless network name (also known as SSID) and restrict the channel set based on country requirements.
Enable Wireless Network галочка есть
Hide Wireless Network (Hidden SSID) галочки нет
Wireless Network Name (SSID): имя
Channel: цифорки
Transmission Mode: mixed mode 802.11b only 802.11g only
Transmission Rate: Auto
Multicast Rate: Auto
Wireless User Isolation: Off или On
Country: *выбрать*
вторая страница
Wireless Security
This page allow you to protect your wireless network by specifying WEP, 802.1x, WPA, or WPA2 wireless security. Before setting up security, ensure that your wireless adaptors support the same type of security. Most support WEP, but not all support WPA, WPA2, or 802.1x.
Wireless Security: Disabled 64-bit WEP 128-bit WEP 802.1x WPA WPA-PSK WPA2 WPA2-PSK (тут выбрать)
Authentication Type: Open System или Shared Key
Encryption Keys
Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys.
Format: Hexadecimal digits (0-9,A-F,and a-f are valid) или ASCII characters (any printable characters are valid)
Key1:
Key2:
Key3:
Key4:
Default Transmission Key: 1или2или3или4
After enabling security and clicking Apply, you will lose the connection with your wireless ADSL router. You should now set-up security on your wireless adapters in order to re-establish the connection.
третья страница
Wireless MAC Access Control
This page lets you to specify the wireless adaptors that are allowed to connect to your ADSL router.
Click "Apply" to configure the wireless access control mode.
Access Control: Off или
On in Allow mode (Only those wireless adaptors listed in the access control table are allowed to connect to your ADSL router, others are denied.)
или
On in Deny mode (Only those wireless adaptors listed in the access control table cannot connect to your ADSL router, others are allowed.)
|